List Of Isolation Messages
SSO1: Main power
MAIN POWER ISOLATED; VCB inhibited
Loco is dead Ask for relief loco
SSO2: traction bogie 1
BOGIE-1ISOLATED;Only half T.E.and B.E.available
Inform maintenance staff
SSO3: Traction bogie 2
BOGIE 2 ISOLATED; Only half traction and braking power available
Inform maintenance staff
SSO4: Harmonic Filter
HARMONIC FILTER ISOLATED
Speak to TLC Reduce speed below 40 km/h
Inform maintenance staff speaks to TLC
SSO6: . Converter 1
AUXILIARY CONVERTER 1
AUXILIARY CONVERTER 1
ISOLATED Driving still possible Max.
Ventilation level will be reduced Inform maintenance staff
SSO7: Aux. Converter
AUXILIARY CONVERTER 2 ISOLATED
Driving still possible Max. Ventilation level will be reduced Inform maintenance staff
SSO8: Aux. Converter
AUXILIARY CONVERTER 3 ISOLATED
Driving still possible Max. Ventilation level ‘ill be reduced Inform maintenance staff
SS13: Cab 1
CAB 1 ISOLATED
Drive from Cab 2 Change to Cab2 Inform maintenance staff
SS14: Cab 2
CAB 2 ISOLATED
Drive from Cab 1 Change to cab-1 Inform maintenance staff
S517: FLG 1
FLG1 ISOLATED
No multiple operations possible, Inform maintenance staff
SS18: FLG 2
FLG2 ISOLATED
No electrical brake power available, Inform maintenance staff
SS19: Train bus
TRAINBUS ISOLATED, Multiple operations not possible Inform maintenance staff
List Of Information Messages
Information 001
SELF HOLD MODE ACTIVE
for 10 mm. MCE will switch off Change cab or repair train or multiple operations within 10 minutes
Information 002
MORE THAN ONE CAB ACTIVE
Deactivate non-driving cab otherwise after 10 mm. MCE switches off
Information 003
Traction MAY NOT BE AVAILABLE ON THIS LOCO OR ON THE SLAVE LOCO
Bring throttle to 0 . then set again Bring TE/BE throttle to “0” and set it again
Information 004
TRAINBUS CONFIGURATION RUNNING
Please wait
Information 005
FULL TE/BE RESTORED+
Information 006 PANTO RAISING Please wait
AUXILIARY CONVERTER 3 ISOLATED
Driving still possible Max. Ventilation level ‘ill be reduced Inform maintenance staff
SS13: Cab 1
CAB 1 ISOLATED
Drive from Cab 2 Change to Cab2 Inform maintenance staff
SS14: Cab 2
CAB 2 ISOLATED
Drive from Cab 1 Change to cab-1 Inform maintenance staff
S517: FLG 1
FLG1 ISOLATED
No multiple operations possible, Inform maintenance staff
SS18: FLG 2
FLG2 ISOLATED
No electrical brake power available, Inform maintenance staff
SS19: Train bus
TRAINBUS ISOLATED, Multiple operations not possible Inform maintenance staff
List Of Information Messages
Information 001
SELF HOLD MODE ACTIVE
for 10 mm. MCE will switch off Change cab or repair train or multiple operations within 10 minutes
Information 002
MORE THAN ONE CAB ACTIVE
Deactivate non-driving cab otherwise after 10 mm. MCE switches off
Information 003
Traction MAY NOT BE AVAILABLE ON THIS LOCO OR ON THE SLAVE LOCO
Bring throttle to 0 . then set again Bring TE/BE throttle to “0” and set it again
Information 004
TRAINBUS CONFIGURATION RUNNING
Please wait
Information 005
FULL TE/BE RESTORED+
Information 006 PANTO RAISING Please wait
