DIESEL LOCO - How to Move the Loco
First of all check the locomotive after ensuring every thing is normal then starts the engine systematically. All pressure to be adjusted and ensure loco brake in applied condition, then release hand brake, remove wooden wedges. Move the Loco with following procedure –
1. Put ECS on RUN.
2. Put RH in desired direction.
3. Put ‘ON’ MCB1&2.
4. Put ‘ON’ GFCO-1&2.
5. Open one throttle notch, load meter shows 300 Amp current.
6. Release the loco brake.
7. Loco start to move.
